SCA 1800ET-LK

• Protective clothing must be integrated with the upper and lower hoods and include face lenses, boots, gloves, and zippers.
• The zipper uses a gas-tight zipper, the seam does not bend when sewing, there are no wrinkles, and there should be a zipper cover in the form of an adhesive tape as a structure to prevent the inflow of harmful substances and heat.
• The face lens must be able to secure a wide field of view with a structure that can withstand hazardous chemicals, flame retardancy and heat resistance, and must have a frost protection function.
• The glove should have a double structure, and the innermost layer should be a multilayer film, and the middle layer should be in the form of a rubber glove.
• Boots should be fastened with a fixing ring made of chemical, flame-retardant and heat-resistant materials, and have a structure that can be easily worn.
• The exhaust valve assembly should automatically exhaust air to maintain the internal pressure of the protective clothing and should be covered with the same material as the fabric layer.
• The air inlet device is installed in conjunction with an air respirator to minimize thermal stress inside the protective clothing, and a medium pressure hose that can be installed with an air respirator should be provided (optional).
• The product must be certified by the Occupational Safety and Health Agency​ 

* The above specifications are subject to change without notice to improve product performance.